Konica Minolta BIZHUB 360 User Manual page 226

5
0 Load the original in the ADF.
Combination of the original sizes to be mixed depends on the widest
original width (width of the ADF original guides). For details, see
"Positioning Original into the ADF" on page 10-16.
0 Adjust the paper guides to the original securely. If incorrectly loaded, the
original may not be fed straight, resulting in paper misfeed or damage to
the original.
0 Do not load more than 80 sheets of the original, otherwise the original
may be misfed or damaged, or machine trouble may be caused.
If the number of original sheets exceeds 80, divide them into blocks to
scan. For details, see "Separate Scan Setting" on page 4-69.
0 If the original is placed on the original glass, scan the original referring to
"To position the original on original glass" on page 4-11, then proceed to
step 3.
0 When Mixed Original is specified, Auto Paper Select will function
automatically. To copy to a single and desired paper size, manually
specify Auto Zoom Select. For details, see "To select a magnification
ratio automatically (Auto Zoom)" on page 4-54.
1
Arrange the mixed size original faceup, aligning the left and rear sides
of each.
– For the double-sided original,
arrange it with the first page
faceup, and align the left and rear
sides of each.
2
Position the original FACEUP (with
the first page UP) in the ADF.
– Align the left and rear sides of the
original to the ADF, then adjust
the paper guides.
5-10
Combine Originals/ Original Image Type
bizhub 500/420/360 (Phase 3)