Auto Tray Switch Function - Konica Minolta BIZHUB 360 User Manual

Paper and Original Information

Auto Tray Switch Function

If the selected paper tray runs out of paper while a job is being printed and a
different paper tray is loaded with paper meeting the following conditions,
the other paper tray is automatically selected so printing can continue. If the
optional large capacity unit LU-201 is installed, a maximum of 5,650 copies
can be made continuously. (The paper tray is automatically switched only if
the "ATS Permission parameter" in the Utility mode is set to "Permit".)
Operating Conditions (Set the following condition at "1 System Setting>3
Paper Tray Setting" of User Setting.)
- Select the same paper type at "1 Paper Type".
- Select the paper trays to be selected automatically by "2 Auto Tray Select
Setting", if Auto paper select is functioned.
Tray Priority is available.
- Select "Allow" at "3 Auto Tray Switch ON/OFF"
Load the following paper into the paper trays.
- The same size in the same orientation.
- The same paper type.
bizhub 500/420/360 (Phase 3)
10
10-11