Konica Minolta BIZHUB 360 User Manual page 697

Utility <Administrator Setting>
5
Select the condition to operate the ADF Frame Erase function.
Select whether or not to operate this function whenever using ADF, and
also specify the erase amount.
– Touch [ADF Frame Erase] to highlight it, then specify the desired
erase amount using [+] and [–] under Job Setting in the right side
area of the screen.
Available range is 1 to 5 mm. Over 5 mm of the erase amount
cannot be specified.
– To disable this function, specify 0 mm as erasure amount.
– This setting will be valid just after specified.
6
If further changes are required, touch the desired key.
bizhub 500/420/360 (Phase 3)
16
16-75