Polling Transmission - Konica Minolta Minoltafax 1800 User Manual

To delete the document from memory enter [0] at step 2, press
[MODE/CLEAR] and then [ENTER]. If there are several documents in the
memory select the corresponding ID number by pressing [TYPE ORG.
or [RESOLUTION
4.3.8

Polling Transmission

This function is identical to the memory polling transmission, except from
the fact that the transmission is done directly from the document feeder.
To leave a document in the feeder until it is polled, select "POLL TX"
mode in the display by pressing [MODE/CLEAR] before placing the
document in the document feeder. In this mode no ID number can be
assigned. If there is a document for polling in the memory and one in the
document feeder, the one in memory will be sent first.
Description
1
2
3
. . . .
After the transmission, the machine must be manually set back to
the original operation mode (e.g. FAX) by pressing [MODE/CLEAR].
Minoltafax 1800
] and then press [MODE/CLEAR].
Press [MODE/CLEAR] until " Poll Tx "
appears in the display.
Place the document in the document
feeder.
Now the document can be polled by the
other station.
S
Display
15/12 13:28 M100
[POLL TX]
15/12 13:28 M100
[POLL TX]
FAX CONNECTION
RECEIVING
DIRECT SEND
G3 96 P01
TRANSMISSION END.
TX OK
ENDING
]
55