Broadcast - Konica Minolta Minoltafax 1800 User Manual

4.3.6

Broadcast

Your Minoltafax 1800 can send documents from the memory up to 71
programmed stations in the one-touch keys, in the speed dial numbers
and in the group dial function with one single operation. The machine dials
the number and sends the document to each number. If one of the
numbers is busy, your fax machine will postpone that number until the end
of the session and will try the transmission again. After the process is
completed, a report is printed automatically and the machine returns to
the standby mode. Up to 5 numbers can be put in directly.
Description
Place the document face down in the document feeder. If necessary
adjust the resolution and the contrast.
1
2
3
4
5
6
Minoltafax 1800
Press [FUNCTION].
Press [1] + [ENTER].
Enter the numbers using the one-touch
keys, speed dial numbers and groups
and press [ENTER].
When you have entered all numbers
press [ENTER].
Enter the transmission time with the
numeric keys.
Press [START] to scan the document.
The Minoltafax assigns a three digit
identification number to the process.
With this number the process can be
identified later on, e.g. for deleting. If the
machine runs out of memory during the
scanning, the machine switches to
standby modus. In this case, program
the process again at a later time when
there is more memory capacity.
S
Display
BROADCASTING
SELECT LOCATION
LOC. COUNTER =01
SEL. LOC/ENTER.
TIME=00:00
0-9, START
TIME=12:04
0-9, START
BROADCASTING
SET DOCUMENT MXX
BROADCASTING
SESSION NO=112
ENDING
53