Interrupting The Current Transmission - Konica Minolta Minoltafax 1800 User Manual

S
ENDING
4.3.9

Interrupting the Current Transmission

Should it be necessary to interrupt the current transmission, simply press
[STOP] and your Minoltafax 1800 stops the current operation and returns
to standby mode.
Description
1
2
3
4
. . . .
56
Press [STOP].
If the operation had not begun when
[STOP] was pressed the document is
ejected.
If the operation had begun, the
opposite display appears. In this case
follow the steps given below.
Press [1] to interrupt the current
transmission and return to standby
mode. In this case the machine will try
the transmission later on from memory.
If you press [0], the number of the
current operation and the
corresponding telephone number start
to flash.
Press [ENTER] and then [STOP] to
terminate the operation.
After an operation has been interrupted the machine
prints an error report.
Display
CANCEL =0
INTERRUPT =1
FAX CONNECTING
USER INTERRUPT.
SESSION NO=_XXX__
PRESS ENTER
FAX CONNECING
USER INTERRUPT.
Minoltafax 1800