4.2.3
Automatic Dialling Using the Speed Dial
Press the speed dial key and enter the two
digits of the programmed speed dial
number (01-50). Confirm the entry by
pressing [ENTER].
The number appears on the display
preceded by the abbreviation SD. Press
[START]. The fax begins to dial the number
after the document has been scanned.
4.2.4
Automatic Group Dial with the One-Touch Keys [13] - [16]
Press one of the one-touch keys [13]-[16].
If a group has been programmed under this
key, its name appears on the display. Your
Minoltafax 1800 begins to dial after the
document has been scanned.
. . . .
Minoltafax 1800
If you are dialling from a PBX system, remember to enter
[#] before any number.
SPEED DIAL.
#01
01-50, ENTER
SD01=
PRESS START
OT15=_GROUP DIAL
PRESS START
S
ENDING
45