Tel/Fax] Receiving Mode; Answering Machine Mode (Tad - Mode); Setting The Answering Machine Mode - Konica Minolta Minoltafax 1800 User Manual

R
ECEIVING
5.3

[TEL/FAX] Receiving Mode

The Tel / Fax is only sensible, if you are expecting conversation calls on
the same line. The Minoltafax 1800 answers the call and recognizes if it is
a fax call or a conversation call.
If a conversation call comes in, the machine shows this by max. 5 rings
and a corresponding message in the display. Lift the receiver within this
time and press [TALK] to talk to the person ringing.
If the incoming call is a fax call, it is recognised by the MINOLTAFAX
1800 and the fax machine begins to receive the data automatically
5.4

Answering Machine Mode (TAD - Mode)

This mode allows you to operate the fax machine together with an
answering machine. In this case, conversation calls can be recorded on
the answering machine and fax calls are answered by the fax machine.
Press [MODUS/CLEAR] until "TAD" appears in the display. If the
answering machine is off, all calls must be answered manually (cf.
„Manual Receiving") or the fax machine must be switched to automatic
receiving. For this press [MODUS/CLEAR] until [FAX] appears in the
display.
.
Make sure the answering machine is connected to the telephone
line after the fax machine.
5.4.1

Setting the Answering Machine Mode

Your Minoltafax can be combined with any answering machine. After the
"peep" a message can be left.
The fax machine allows the following settings:
No. Setting
1
2
3
4
60
remote control code
recording time
silence time
ring counter
Presetting
5
000 (no limitation)
none
4 rings
Option
(5-9)
000-200
3,6,9 (s) or none
4-8
Minoltafax 1800