Remote Code (Ctrl.); Recording Time - Konica Minolta Minoltafax 1800 User Manual

5.4.2

Remote Code (CTRL.)

With this code you can switch the fax machine temporarily off to allow
communication with your answering machine (factory presetting is "5"). If
the fax receives the set code in TAD mode again, it switches to receiving
mode.
Description
1 Press [FUNCTION] + [#].
2 Press [ENTER].
3 Press [1].
4 Press [ENTER] and enter a number (0-9).
Then press [ENTER].
5.4.3

Recording Time

Here you set the time the fax gives to the answering machine to record a
message, before it switches to the receiving mode
Description
1 Press [FUNCTION] + [#].
2 Press [ENTER].
3 Press [2].
4 Press [ENTER] and enter the period
(0-200 sec.). Then press [ENTER].
.
Minoltafax 1800
000 = No limitation
R
ECEIVING
Display
TAD SETUP
0-9, *, #, ¬, ENTER
TAD SETUP
1-4, ¬, ®
REMOTE CTRL. CODE
1-4, ¬, ®, ENTER
CTRL. CODE=5*
DATA ENTRY OK
Display
TAD SETUP
0-9, *, #, ¬, ENTER
TAD SETUP
1-4, ¬, ®
RECORD TIME
1-4, ¬, ®, ENTER
RECORD TIME=000
DATA ENTRY OK
61