User Instructions (For U.k. Users) - Konica Minolta Minoltafax 1800 User Manual

G
ENERAL

1.4 User Instructions (For U.K. Users)

These facsimiles are approved for connection to the British Telecom
public switched telecommunication systems in accordance with the British
telecommunication Act of 1984. The usage should be subject to the
conditions set out in these instructions. Any other usage will INVALIDATE
this approval.
1. The approval of this facsimile for connection to the public switched
telephone network (PSTN) is invalidated if the facsimile is used with or
connected to:
(i) internal software that has not been formally accepted by BABT or
(ii) external control software or external control apparatus which causes
the operation of the facsimiles to contravene BABT requirements.
2. This facsimile is approved for the use of the following facilities:
Tone Dialling (DTMF)
Automatic Clearing
Automatic answering (Facsimile with auto answer to ITU-T.30)
Last Number Redial
Automatic call initiation
Automatic dialling facilities
Automatic multiple repeat dial attempts
Series connection for "Off Hook" detection
Memory dialling
Any other usage will INVALIDATE the approval of the apparatus if as a
result it then ceases to conform to the standard against which approval
was granted.
3. This facsimile is suitable for connection to exchange lines on PSTN
directly or via a compatible private branch exchange.
4. It cannot be guaranteed that the facsimile will operate under all
possible conditions of connection to compatible PBXs. Any cases of
difficulty should be referred in the first instance to the supplier of the
apparatus.
5. Connection to PSTN must not be hardwired.
The connection to PSTN must be disconnected before the mains plug
is removed.
6. The facsimile may be used on PSTN employing Loop disconnect of MF
signaling. However, please note as follows: Although the facsimile can
use either Loop disconnect or DTMF signalling, only the performance of
4 Minoltafax 1800