The Recurring Schedule Add/Edit Screen - ZyXEL Communications ZyWall USG 50-H Series User Manual

Chapter 31 Schedules

31.2.2 The Recurring Schedule Add/Edit Screen

The Recurring Schedule Add/Edit screen allows you to define a recurring schedule or edit
an existing one. To access this screen, go to the Schedule screen (see
470), and click either the Add icon or an Edit icon in the Recurring section.
Figure 384 Object > Schedule > Edit (Recurring)
The Year, Month, and Day columns are not used in recurring schedules and are disabled in
this screen. The following table describes the remaining labels in this screen.
Table 175 Object > Schedule > Edit (Recurring)
LABEL
Configuration
Name
Date Time
Start
Stop
Weekly
472
DESCRIPTION
Type the name used to refer to the recurring schedule. You may use 1-31
alphanumeric characters, underscores(
cannot be a number. This value is case-sensitive.
Type the hour and minute when the schedule begins each day.
Year - disabled
Month - disabled
Day - disabled
Hour - 0 - 23
Minute - 0 - 59
The Hour and Minute fields are both required.
To set all day (24 hours), configure the start hour and minute both to 0.
Type the hour and minute when the schedule ends each day.
Year - disabled
Month - disabled
Day - disabled
Hour - 0 - 23
Minute - 0 - 59
The Hour and Minute fields are both required.
To set all day (24 hours), configure the stop hour to 23 and minute to 59.
Section 31.2 on page
_ ), or dashes (-), but the first character
ZyWALL USG 50-H User's Guide