Specifying The Transmission Source Setting - Konica Minolta BIZHUB 350 User Manual

Internet faxing
Item
Network
**(Net.)
* The receiving machine prints these items when "Yes" is specified on the RX
Doc. Header Print screen.
**Changes to ( ) if the optional fax kit has been installed.

Specifying the transmission source setting

Entered text such as the name, fax number, and address can be printed at
the top of the output page.
1
Touch [Menu].
– If the optional fax kit has been installed, touch [FAX Menu].
2
Touch [Setting 1], then [TSI].
– If the optional fax kit has been installed, touch [Set 1], then [TSI].
SCANReady
One-Touch
Setting 1
TSI only
TSI
2in1
Job List
200/250/350
Description
Subject Se- The subject line of an e-mail message can be selected from subject
*
lection lines registered in advance.
Reply Ad- Displays the e-mail address of this machine as the sender of the e-
*
dress mail message. When specifying e-mail addresses other than that of
this machine, select an address from a registered one-touch dial but-
ton.
File Name Enter when a set file name is to be specified as the file name when
saving the file. Up to 16 characters can be entered.
Note
The file name in Network functions only when the desti-
nation is a computer e-mail address.
FROM: NEWYORK
Image data has been attached to the e-mail.
Fine
Direct
Quality&
Search
Input
Reduction
Setting 2 Network
TX Report
2-Sided TX Rotation TX
Chain
Menu
Memory
100%
Free
6
6-23