Specifying Settings For Limiting User Authentication To Only Scan Functions (Mode 479) - Konica Minolta bizhub 362 User Manual

Utility mode
Specifying settings for limiting user authentication to only Scan
functions (mode 479)
Specify whether or not user authentication is performed only when the
[Fax/Scan] or [Extra Scan] key is pressed.
Settings at time of purchase
Bit
Setting
Specifying the setting
The grayed out cells are the settings at the time of purchase.
Bit
7, 6, 5
4, 3, 2, 1, 0
Reminder
Do not specify settings for mode 479 other than those described in
"Specifying the setting".
!
Detail
If user authentication is limited to Scan functions, touch [Account/User
Auth.] in the Administrator Management 1 screen, and then select
"External Server" as the user authentication method. For details on the
user authentication method, refer to "Specifying the
account/authentication settings (User Authentication ON/OFF
parameters)" on page 12-31.
bizhub 362/282/222
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
---------------------- 000
Specifies whether or 11001
not to limit authenti-
00000
cation on Fax and
Scan functions.
12
Description
*Do not change these
bits when specifying
settings for this func-
tion.
Limited
Not limited
12-67