Network - Reply (E-Mail/I-Fax); Network - File Name (E-Mail/I-Fax); Application - Bulletin Setting (G3); Registering A Document On A Bulletin Board - Konica Minolta bizhub C200 Operation Manual

5
5.5.13

Network - Reply (E-Mail/I-FAX)

When sending e-mail messages, an e-mail address registered with a one-touch dial button can be specified
as the recipient (Reply-to address) when the receiver of the e-mail message sends a reply.
Select a one-touch dial button, and then touch [OK].
5.5.14

Network - File Name (E-Mail/I-FAX)

The name of the data file attached to an e-mail message can be specified. A maximum of 16 characters can
be entered.
5.5.15

Application - Bulletin Setting (G3)

Documents can be registered on a bulletin board to be sent when the instructed by the recipient.
!
Detail
In order to register a document on a bulletin board, the bulletin board must be set up in advance. For
details on registering a bulletin board, refer to "Bulletin (G3)" on page 7-6.
This parameter does not appear if the optional fax kit has not been installed.

Registering a document on a bulletin board

Select the bulletin board where the document is to be registered, and then specify settings, for example, for
the resolution and density.
- The "Quick Scan TX", "Quick Memory TX", "Polling TX", "Timer TX", "Password TX" and "F-Code TX"
functions cannot also be specified.

Bulletin Setting - Quality

For the setting procedure, refer to "Quality (G3/I-FAX/IP/E-Mail/Relay)" on page 5-26.

Bulletin Setting - Density

For the setting procedure, refer to "Density (G3/I-FAX/IP/E-Mail/Relay)" on page 5-27.

Bulletin Setting - Reduction/Area

For the setting procedure, refer to "Reduction/Area (G3)" on page 5-28.
5-38
Transmitting data
bizhub C200