Changing A Program; Changing/Deleting The Program Name - Konica Minolta bizhub C200 Operation Manual

3
5
Type in the program name, and then touch [Next].
– The program name can contain a maximum of 24 characters.

Changing a program

Program settings can be changed.
1
Change the settings.
– Quality: Document type settings can be changed.
– Menu: Transmission settings can be changed.
2
Press the [Mode Check] key.
3
Touch [Register].
4
Touch [Program].
5
Touch the one-touch dial button for the program that is to be changed.
6
Check the message that appears, and then touch [Yes] to overwrite the settings.
7
To change the program name, change the name.
8
Touch [OK], and then touch [OK] in the next two screens that appear.

Changing/deleting the program name

The name of a registered program can be edited or deleted.
1
Touch the one-touch dial button for the program.
2
To delete it, touch [Delete].
3-16
Control panel/touch panel
bizhub C200