Character Entry Method; Entry Screens - Kyocera TASKalfa 306ci Operation Manual

Appendix > Character Entry Method

Character Entry Method

To enter characters for a name, use the on-display keyboard in the touch panel following the steps as explained below.
NOTE
QWERTY, QWERTZ and AZERTY are keyboard layouts the same as a PC keyboard are available. If necessary,
change the layout. For information on how to change layouts, refer to the following:
Machine's Operation Guide
QWERTY layout is used here as an example. You may use another layout following the same steps.

Entry Screens

Lower-case Letter Entry Screen
12 11 10
Add - Name
1
Abc
ABC A/a
2
Cancel
3
No. Display/Key
1 Display
2 Keyboard
3 [Cancel]
4 [< Back]
5 [OK] / [Next >]
6 Enter Key
7 Space Key
8 Delete Key
9 [Input] / [Limit] Display
10 Cursor Key
11 [A/a] / [a/A]
12 [ABC] / [Symbol]
9 8
Input:
3
Limit: 32
Del.
7
6
< Back Next >
4 5
Displays entered characters.
Select the character to enter.
Select to cancel entered characters and return to the screen before
the entry was made.
Select to return to the previous screen.
Select to save the entered characters and move to the next screen.
Select to enter a line break.
Select to insert a space.
Select to delete a character to the left of the cursor.
Displays maximum number of characters and the number of
characters entered.
Select to move the cursor on the display.
Select to switch between upper case and lower case.
Select the characters that are entered. To enter symbols or
numbers, select [Symbol].
10-2
Description