Registering Permit Fax No - Kyocera ECOSYS M6530cdn Operation Manual

Fax Settings > Transmission Restriction

Registering Permit FAX No.

1
2
3
Reception • Register Reject FAX numbers.*
Rejection
Registering Reject FAX No. (page 8-12)
• Reception restriction settings are specified
in [Reject List] in Reception Restrictions.
Setting Reception Restriction (page 8-15)
* If there are no Reject FAX numbers registered, calls are only rejected from senders whose Local FAX
Numbers (Indicates local FAX information entries, not the actual line numbers.) are not registered.
NOTE
Up to 25 Permit FAX numbers can be registered.
Display the screen.
[System Menu/Counter] key > [▲] [▼] key > [FAX] > [OK] key > [▲] [▼] key >
[TX/RX Restrict.] > [OK] key > [▲] [▼] key > [Permit No. List] > [OK] key
Add a permit fax number.
1
[Menu] > [▲] [▼] key > [Add FAX Number] > [OK] key
2
Use the numeric keys to enter a Permit FAX number.
NOTE
Up to 20 digits can be entered.
3
Select the [OK] key.
To register another permit fax number, repeat Steps 2-1 to 2-3.
Prerequisites
8-11
Reception Rejection
Requirements
• The sender's Local FAX
Number is not registered.
• The sender's Local Fax
Number matches a Reject FAX
No. registered on the machine.