Configuring Basic Software Features - Dell PowerConnect B-FCXs Configuration Manual

Configuring Basic Software Features

Table 6
support.
TABLE 6
Feature
Basic System Parameters
System name, contact, and location
SNMP trap receiver and trap source
address
Disable Syslog messages and traps for
CLI access
Cancelling an outbound Telnet session
System time using a Simple Network
Time Protocol (SNTP) server or local
system counter
System clock
Packet-based broadcast, multicast, and
unknown-unicast limits
CLI banners
Local MAC address for Layer 2
management traffic
Basic Port Parameters
Port name
10/100/1000 port speed
Auto-negotiation
Auto-negotiation maximum port speed
advertisement and down-shift
Duplex mode
Auto MDI/MDIX detection
Port status (enable or disable)
Flow control:
•
Symmetric flow control
•
PowerConnect B-Series FCX Configuration Guide
53-1002266-01
lists the individual Dell PowerConnect switches and the basic software features they
Supported basic software features
Responds to flow control packets,
but does not generate them
Can transmit and receive 802.1x
PAUSE frames
PowerConnect B-Series FCX
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Chapter
2
17