Ospf Parameters; Configuration Rules - Dell PowerConnect B-FCXs Configuration Manual

4. Define redistribution filters, if desired.
5. Enable redistribution, if you defined redistribution filters.
6. Modify default global and port parameters as required.
7.
NOTE
OSPF is automatically enabled without a system reset.

Configuration rules

•
•
•
•

OSPF parameters

You can modify or set the following global and interface OSPF parameters.
Global parameters:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Modify OSPF standard compliance, if desired.
Dell PowerConnect devices support a maximum of 676 OSPF interfaces.
If a router is to operate as an ASBR, you must enable the ASBR capability at the system level.
Redistribution must be enabled on routers configured to operate as ASBRs.
All router ports must be assigned to one of the defined areas on an OSPF router. When a port
is assigned to an area, all corresponding subnets on that port are automatically included in the
assignment.
Modify OSPF standard compliance setting.
Assign an area.
Define an area range.
Define the area virtual link.
Set global default metric for OSPF.
Change the reference bandwidth for the default cost of OSPF interfaces.
Disable or re-enable load sharing.
Enable or disable default-information-originate.
Modify Shortest Path First (SPF) timers
Define external route summarization
Define redistribution metric type.
Define deny redistribution.
Define permit redistribution.
Enable redistribution.
Change the LSA pacing interval.
Modify OSPF Traps generated.
Modify database overflow interval.
29
Configuring OSPF
931