Displaying Ip Information – Layer 2 Switches - Dell PowerConnect B-FCXs Configuration Manual

TABLE 165
This field...
passive opens
failed attempts
active resets
passive resets
input errors
in segments
out segments
retransmission
RIP statistics
The RIP statistics are derived from RFC 1058, "Routing Information Protocol".
requests sent
requests
received
responses sent The number of responses this device has sent to another RIP router request for all or part of this
responses
received
unrecognized
bad version
bad addr family The number of RIP packets dropped because the value in the Address Family Identifier field of
bad req format
bad metrics
bad resp
format
resp not from
rip port
resp from
loopback
packets
rejected
Displaying IP information – Layer 2 Switches
You can display the following IP configuration information statistics on Layer 2 Switches:
PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Displaying IP configuration information and statistics
CLI display of IP traffic statistics – Layer 3 Switch (Continued)
Displays...
The number of TCP connections opened by this device in response to connection requests (TCP
SYNs) received from other devices.
This information is used by Dell customer support.
The number of TCP connections this device reset by sending a TCP RESET message to the device
at the other end of the connection.
The number of TCP connections this device reset because the device at the other end of the
connection sent a TCP RESET message.
This information is used by Dell customer support.
The number of TCP segments received by the device.
The number of TCP segments sent by the device.
The number of segments that this device retransmitted because the retransmission timer for the
segment had expired before the device at the other end of the connection had acknowledged
receipt of the segment.
The number of requests this device has sent to another RIP router for all or part of its RIP routing
table.
The number of requests this device has received from another RIP router for all or part of this
device RIP routing table.
device RIP routing table.
The number of responses this device has received to requests for all or part of another RIP
router routing table.
This information is used by Dell customer support.
The number of RIP packets dropped by the device because the RIP version was either invalid or
is not supported by this device.
the packet header was invalid.
The number of RIP request packets this router dropped because the format was bad.
This information is used by Dell customer support.
The number of responses to RIP request packets dropped because the format was bad.
This information is used by Dell customer support.
The number of RIP responses received from loopback interfaces.
This information is used by Dell customer support.
26
883