Dell PowerConnect B-FCXs Configuration Manual page 766

24
LLDP-MED attributes advertised by the Dell PowerConnect device
+ MED Location ID
+ MED Location ID
+ MED Location ID
+ MED Extended Power via MDI
+ Management address (IPv4): 192.1.1.121
+ VLAN name (VLAN 99): "Voice-VLAN-99"
NOTE
The contents of the show output will vary depending on which TLVs are configured to be advertised.
A backslash (\) at the end of a line indicates that the text continues on the next line.
The fields in the above output are described in the individual TLV advertisement sections in this
chapter.
Syntax: show lldp local-info [ports ethernet <port-list> | all]
If you do not specify any ports or use the keyword all, by default, the report will show the local
information advertisements for all ports.
For <port-list>, specify the ports in the following formats:
724
Application Type : Video Conferencing
Policy Flags : Known Policy, Tagged
VLAN ID : 100
L2 Priority : 5
DSCP Value : 10
Data Format: Coordinate-based location
Latitude Resolution
Latitude Value
Longitude Resolution : 18 bits
Longitude Value
Altitude Resolution
Altitude Value
Datum
Data Format: Civic Address
Location of: Client
Country : "US"
CA Type : 1
CA Value : "CA"
CA Type : 3
CA Value : "Santa Clara"
CA Type : 6
CA Value : "4980 Great America Pkwy."
CA Type : 24
CA Value : "95054"
CA Type : 27
CA Value : "5"
CA Type : 28
CA Value : "551"
CA Type : 29
CA Value : "office"
CA Type : 23
CA Value : "John Doe"
Data Format: ECS ELIN
Value : "1234567890"
Power Type : PSE device
Power Source : Unknown Power Source
Power Priority : Low (3)
Power Value : 6.5 watts (PSE equivalent: 7005 mWatts) + Port VLAN ID: 99
: 20 bits
: -78.303 degrees
: 34.27 degrees
: 16 bits
: 50. meters
: WGS 84
PowerConnect B-Series FCX Configuration Guide
53-1002266-01