And Statistics - Dell PowerConnect B-FCXs Configuration Manual

25
PIM Sparse
Displaying PIM Sparse configuration information

and statistics

You can display the following PIM Sparse information:
•
•
•
•
•
•
•
•
•
•
•
Displaying basic PIM Sparse configuration information
To display basic configuration information for PIM Sparse, enter the following command at any CLI
level.
PowerConnect#show ip pim sparse
Global PIM Sparse Mode Settings
Hello interval: 60, Neighbor timeout: 180
Bootstrap Msg interval: 130, Candidate-RP Advertisement interval: 60
Join/Prune interval: 60, SPT Threshold: 1
Interface Ethernet e3/8
TTL Threshold: 1, Enabled
Local Address: 207.95.8.1
Interface Ve 1
TTL Threshold: 1, Enabled
Local Address: 207.95.6.1
Syntax: show ip pim sparse
This example shows the PIM Sparse configuration information on PIM Sparse router A in
Figure
This display shows the following information.
TABLE 127
This field...
Global PIM Sparse mode settings
Hello interval
750
Basic PIM Sparse configuration information
Group information
BSR information
Candidate RP information
RP-to-group mappings
RP information for a PIM Sparse group
RP set list
PIM Neighbor information
The PIM flow cache
The PIM multicast cache
PIM traffic statistics
122.
Output of show ip pim sparse
Displays...
How frequently the Layer 3 Switch sends PIM Sparse hello messages to its PIM Sparse
neighbors. This field show the number of seconds between hello messages. PIM Sparse
routers use hello messages to discover one another.
PowerConnect B-Series FCX Configuration Guide
53-1002266-01