Dell PowerConnect B-FCXs Configuration Manual page 56

1
Logging on through the Web Management Interface
Using the CLI, you can modify the appearance of the Web Management Interface with the
web-management command.
To cause the Web Management Interface to display the List view by default, enter the following
command.
PowerConnect(config)#web-management list-menu
To disable the front panel frame, enter the following command.
PowerConnect(config)#no web-management front-panel
When you save the configuration with the write memory command, the changes will take place the
next time you start the Web Management Interface, or if you are currently running the Web
Management Interface, the changes will take place when you click the Refresh button on your
browser.
Using the Web Management Interface
1. Click on the plus sign next to Configure in the tree view to expand the list of configuration
2. Click on the plus sign next to System in the tree view to expand the list of system configuration
3. Click on the plus sign next to Management in the tree view to expand the list of system
4. Click on the Web Preference link to display the Web Management Preferences panel.
5. Enable or disable elements on the Web Management Interface by clicking on the appropriate
14
options.
links.
management links.
radio buttons on the panel. The following figure identifies the elements you can change.
PowerConnect B-Series FCX Configuration Guide
53-1002266-01