Displaying Multicast Neighbor Information - Dell PowerConnect B-FCXs Configuration Manual

This display shows the following information.
TABLE 134
This field...
Number of group prefixes
Group prefix
RPs expected/received
RP <num>
priority
age

Displaying multicast neighbor information

To display information about the Layer 3 Switch PIM neighbors, enter the following command at any
CLI level.
PowerConnect#show ip pim nbr
Port Neighbor
e3/8
Port Neighbor
v1
Syntax: show ip pim nbr
This display shows the following information.
TABLE 135
This field...
Port
Neighbor
Holdtime sec
PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Output of show ip pim rp-set
Displays...
The number f PIM Sparse group prefixes for which the RP is responsible.
Indicates the multicast groups for which the RP listed by the previous field is a
candidate RP.
Indicates how many RPs were expected and received in the latest Bootstrap
message.
Indicates the RP number. If there are multiple RPs in the PIM Sparse domain, a
line of information for each of them is listed, and they are numbered in ascending
numerical order.
The RP priority of the candidate RP. During the election process, the candidate RP
with the highest priority is elected as the RP.
The age (in seconds) of this RP-set.
NOTE: If this Layer 3 Switch is not a BSR, this field contains zero. Only the BSR
Holdtime Age
sec
207.95.8.10 180
Holdtime Age
sec
207.95.6.2 180
Output of show ip pim nbr
Displays...
The interface through which the Layer 3 Switch is connected to the neighbor.
The IP interface of the PIM neighbor interface.
Indicates how many seconds the neighbor wants this Layer 3 Switch to hold the entry for
this neighbor in memory. The neighbor sends the Hold Time in its Hello packets:
•
If the Layer 3 Switch receives a new Hello packet before the Hold Time received in the
previous packet expires, the Layer 3 Switch updates its table entry for the neighbor.
•
If the Layer 3 Switch does not receive a new Hello packet from the neighbor before the
Hold time expires, the Layer 3 Switch assumes the neighbor is no longer available and
removes the entry for the neighbor.
ages the RP-set.
UpTime
sec sec
60 900
UpTime
sec sec
60 900
25
PIM Sparse
757