8
Configuring standard STP parameters
PowerConnect#show stp-protect e 3
STP-protect is enabled on port 3.
If you enter the show stp-protect command for a port that does not have STP protection enabled,
the following message displays on the console.
PowerConnect#show stp-protect e 4
STP-protect is not enabled on port 4.
Syntax: show stp-protect [ethernet <port>]
Specify the <port> variable in the following formats:
•
Displaying STP information
You can display the following STP information:
•
•
•
•
•
214
PowerConnect B-Series FCX stackable switches – <stack-unit/slotnum/portnum>
All the global and interface STP settings
CPU utilization statistics
Detailed STP information for each interface
STP state information for a port-based VLAN
STP state information for an individual interface
BPDU drop count is 478
PowerConnect B-Series FCX Configuration Guide
53-1002266-01