Settings - Fujitsu MB91460 SERIES FR60 User Manual

6. Settings

Table 6-1 Settings Required to Specify the Oscillation Stabilization Wait Time
Setting
Oscillation stabilization wait time setting
*: For the setting procedure, refer to the section indicated by the number.
Table 6-2 Settings Required to Setup an INITX Pin Reset
Setting
INITX pin input
• Settings required to specify the oscillation stabilization wait time for the main clock
See "Chapter 22 Main Oscillation Stabilisation Timer (Page
• Settings required to specify the PLL lock wait time
See "Chapter 19 Timebase Timer (Page
Setting register
Standby control register (STCR)
Setting item
Refer to the oscillator parameters and the reset
parameters in the Data Sheet.
No.263)".
Chapter 18 Timebase Counter
Setting procedure
No.289)".
6.Settings
Setting
procedure*
See 7.1.
–
259