Setting - Fujitsu MB91460 SERIES FR60 User Manual

6. Setting

Table 6-1 Setting Required in Order to Use the Free-run Timer
Setting of the initialization conditions of the timer
Setting of the count clock
Selection of the internal clock
Selection of the external clock
Start the count operation
In the case of the external clock
Set the clock input pin (CK) as the input.
*: For the setting procedure, refer to the section indicated by the number.
Table 6-2 Setting Required to Enable the Free-run Timer Interrupt
Setting of the free-run timer interrupt vector,
and the free-run timer interrupt level
Setting of the free-run timer interrupt
Clearing interrupt requests
Enabling interrupt requests
*: For the setting procedure, refer to the section indicated by the number.
Table 6-3 Setting Required to Stop the Free-run Timer
Setting of the free-run timer stop bit
*: For the setting procedure, refer to the section indicated by the number.
Setting
Setting
Setting
Setting Registers
Timer control register (TCCS0-TCCS7)
Port function register (PFRxy.z)
Extra port function register (EPFRxy.z)
Setting Registers
See "Chapter 24 Interrupt Control (Page
No.311)".
Timer control register (TCCS0-TCCS7)
Setting Registers
Timer control register (TCCS0-TCCS7)
Chapter 35 Free-Run Timer
6.Setting
Setting
Procedures *
See 7.4
See 7.1
See 7.2
See 7.3
See 7.2
Setting
Procedures *
See 7.5
See 7.7
Setting
Procedures *
7.8
See
741