Specifications For Ieee 1284 Interface Board; Specifications For Wireless Lan Board - Ricoh IM C2000 Series User Manual

Specifications for IEEE 1284 Interface Board

Item
Transmission spec
Required cable

Specifications for Wireless LAN Board

• Note that the available channels (frequency ranges) and locations to use the wireless LAN are
subject to the regulations of the country or region where the printer is used. Be sure to use the
wireless LAN according to the applicable regulations.
Item
Transmission spec
Protocol
Transmission rate
Frequency range (Center
Frequency)
Ad-hoc mode Channel
Frequency range (Center
Frequency)
Transmission mode
• Web Image Monitor is supported.
• The transmission rates of 130 Mbps in the 2.4 GHz band is the theoretical values of the wireless
LAN specification. The actual transmission rate may be lower, depending on the operating
environment.
IEEE 1284
Standard IEEE 1284 compliant Micro Centronics 36 pin cable
Based on IEEE 802.11a/b/g/n (wireless LAN)
TCP/IP
2.4 GHz band: 1–130 Mbps
2412–2472 MHz (1–13 channels)
2412–2462 MHz (1–11 channels)
• Ad-hoc mode
• Infrastructure mode
• Direct Connection Mode
• Direct Connection: Group Owner Mode
Specifications
Specifications
List of Specifications
359