Setting A Domain Id - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Basic Switch Management
If multicast alias groups exist, the following fields are shown:
Group ID
Token

Setting a Domain ID

1. Log into the switch.
2. Enter the switchdisable command to disable the switch.
3. Enter the configure command.
4. Enter "Y" after the Fabric parameters prompt:
Example:
Fabric parameters (yes, y, no, n): [no] y
5. Enter a unique Domain ID at the Domain ID prompt:
Example:
Domain: (1..239) [1] 3
6. Complete the remaining prompts (or press Ctrl+D to accept the other settings
7. Enter the switchenable command to re-enable the switch.
48
and exit).
The alias group number and D_ID.
The alias group token (assigned by the N_Port).
Fabric OS Procedures Version 3.1.x/4.1.x User Guide