Configuring A Logical Switch Ip Address For The Core Switch 2/64 - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Initial Configuration
Example:
switch:admin> ipaddrset
Switch number [0 for switch0, 1 for switch1, 2 for CP0, 3 for CP1]: 2
Ethernet IP Address [192.168.186.61]:
Ethernet Subnetmask [255.255.255.0]:
Hostname [192.168.68.193]:
Gateway IP [255.255.255.0]:
Committing configuration...Done.
switch:admin>

Configuring a Logical Switch IP Address for the Core Switch 2/64

1. Have the following information available:
2. Log in to the switch as the admin user.
3. Enter the ipaddrset command at the command line. An interactive
4. Choose the logical switch that you want to configure. Enter the value that
5. Enter the Ethernet IP address when prompted. Click Enter
6. Enter the Ethernet Subnetmask when prompted. Click Enter
7. (Optional) Enter the Fibre Channel IP address. Click Enter
8. Enter the Fibre Channel Subnetmask. Click Enter
9. Enter the ippaddrshow command to verify the data you entered, and exit.
10. Repeat
18
— Ethernet IP Address
— Ethernet Subnetmask
— Fibre Channel IP Address (Optional)
— Fibre Channel Subnetmask
session is opened.
corresponds to that logical region:
— Enter 0 to configure logical switch 0 (slot 1 though 4)
— Enter 1 to configure logical switch 1 (slot 7 though 10)
step 1 through step 9 to configure the second logical switch.
Fabric OS Procedures Version 3.1.x/4.1.x User Guide