switch:admin> slotshow
Slot
Blade Type
---------------------------------
1
SW BLADE
2
UNKNOWN
3
SW BLADE
4
UNKNOWN
5
CP BLADE
6
CP BLADE
7
UNKNOWN
8
SW BLADE
9
SW BLADE
10
SW BLADE
switch:admin>
For complete information about switch FRUs, refer to the Core Switch 2/64
installation guide (the installation guide is also available on the v3.1.x or v4.1.x
Software CD).
Displaying Information on Switch FRUs
To view switch FRU information for a switch:
1. Log into the switch as the admin user.
2. Enter the chassisshow command at the command line. This command
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
ID
Status
2
ENABLED
VACANT
2
ENABLED
VACANT
1
ENABLED
1
ENABLED
VACANT
2
ENABLED
2
ENABLED
2
ENABLED
displays the field replaceable unit (FRU) header content for each object in the
chassis. This command returns information for each FRU including:
Working With the Core Switch 2/64
DISABLED
The blade is powered on but disabled.
FAULTY
The blade is faulty because an error was detected.
UNKNOWN
The blade is inserted but it's state cannot be
determined.
119