Displaying The Uptime Of The Switch - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Diagnostics and Status
The output will appear different on a SAN Switch 2/32 switch. For more
information refer to the switchshow command in the HP StorageWorks
Fabric OS Version 3.1.x/4.1.x Reference Guide.

Displaying the Uptime Of the Switch

To display the uptime for a switch:
1. Log into the switch as the admin user.
2. Enter the uptime command at the command line. This command displays
The following example displays the uptime on a SAN Switch 2/16 using the
uptime command.
Example:
switch:admin> uptime
Up for:
Powered for: 167 days,
Last up at:
Reason:
switch:admin>
180
the length of time the system has been in operation, the total cumulative
amount of up-time since the system was first powered-on, the date and time of
the last reboot, and the reason for the last reboot. The reason for the last
switch reboot is also recorded in the error log.
1 day, 42 mins
2:58
Mon Sep 9 04:36:07 2002
Reboot
Fabric OS Procedures Version 3.1.x/4.1.x User Guide