HP StorageWorks MSA 2/8 - SAN Switch User Manual page 32

Initial Configuration
3. Check that the switch and ports are online.
4. (Optional) Verify that the device is connected to the switch by entering the
switch:admin> nsshow -r
{
Type Pid COS PortName NodeName SCR
NL 2016ce; 3;21:00:00:04:cf:75:78:d2;20:00:00:04:cf:75:78:d2; 0
FC4s: FCP [SEAGATE ST318452FC 0001]
Fabric Port Name: 20:16:00:60:69:90:03:f8
N 201700; 3;21:00:00:e0:8b:05:a3:c9;20:00:00:e0:8b:05:a3:c9; 1
Fabric Port Name: 20:17:00:60:69:90:03:f8
The Local Name Server has 2 entries }
switch:admin>
32
nsshow [-r] command.
Use the -r option to replace the TTL attribute output with SCR (state change
registration) information in the display. SCR is the state change registration of
a device. This value indicates what type of RSCN a device registers to receive.
Example: Display the local name server information.
Fabric OS Procedures Version 3.1.x/4.1.x User Guide