Displaying A Summary Of Port Errors; Error Summary Description - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Displaying a Summary of Port Errors

This porterrshow command displays a summary of port errors for all the
ports in a single switch.
To display a summary of port errors for a switch:
1. Log into the switch as the admin user.
2. At the command line, enter the porterrshow command. The display
Example:
switch:admin> porterrshow
frames
tx rx
---------------------------------------------------------------------
0: 194k 194k
1: 220k 220k
2: 0 0
3: 0 0
4: 0 0
5: 0 0
6: 0 0
7: 0 0
switch:admin>
The following table explains the types of errors counted:
Table 11: Error Summary Description
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
contains one output line per port.
enc crc too
in err shrt long
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
Error Type
frames tx
frames rx
enc in
crc err
too shrt
too long
too bad enc disc link loss loss frjt fbsy
eof out
0 0 9.9m
0 0 148
0 0 15
0 0 29
0 0 32
0 0 10
0 0 2.8k
0 0 1.3k
Description
Frames transmitted.
Frames received.
Encoding errors inside frames.
Frames with CRC errors.
Frames shorter than minimum.
Frames longer than maximum.
Diagnostics and Status
c3 fail sync sig
0 4 73 6
0 1 3 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 2
0 0 0 2
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
185