Disabling syslogd on the Core Switch 2/64 or SAN Switch 2/32
To disable sending of error log messages to a previously enabled remote syslogd
host do the following:
1. Log in to the switch as Admin user.
2. At the command line enter the syslogdipremove command using the
3. Verify the IP address was deleted using the syslogdipshow command
The following example shows how to disable sending of error log messages to a
previously configured remote syslogd host whose IP address is 192.168.148.189.
Example
switch:admin> syslogdipremove 192.168.148.189
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
following syntax:
switch:admin>syslogdipremove "IP address of the remote syslogd
host"
Diagnostics and Status
175