Resizing The Persistent Error Log - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Example
switch:admin> errsavelvlshow
Current message save level is = 3
switch:admin>
The following example shows how to display current error log save level on the
Standby CP for switch 0.The value -s is added to save the Standby CP.
Example
switch:admin> errsavelvlshow -s 0
Current message save level is = 3
switch:admin>

Resizing the Persistent Error Log

To resize the persistent error log of a switch to a new size specified by the operand
number_of_entries:
1. Log in to the switch as the admin user.
2. At the command line enter the errnvlogsizeset command.
The following example shows how to resize the persistent error log to 1500
entries.
Example
switch:admin> errnvlogsizeset 1500
Persistent error log is
switch:admin>
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
resized to store 1500 entries
Diagnostics and Status
169