HP StorageWorks MSA 2/8 - SAN Switch User Manual page 117

The blade must be disabled so that processing stops. Refer to
on page 115.
3. Enter the slotpoweroff command with the following syntax at the
Example
switch:admin> slotpoweroff 3
Slot 3 is being powered off
switch:admin>
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
command line:
slotpoweroff slotnumber
where slotnumber is the slot number of the blade you want to power off.
Working With the Core Switch 2/64
"Disabling a Blade"
117