HP StorageWorks MSA 2/8 - SAN Switch User Manual page 60

Basic Switch Management
Example:
switch:admin> switchstatuspolicyset
To change the overall switch status policy parameters
The current overall switch status policy parameters:
----------------------------------
FaultyPorts
MissingSFPs
PowerSupplies
Temperatures
PortStatus
ISLStatus
Note that the value, 0, for a parameter, means that i
NOT used in the calculation.
** In addition, if the range of settable values in the
** the policy parameter is NOT applicable to the switch
60
— Enter the number of temperature warnings required to change the switch
status to DOWN and click Enter.
— Enter the number of temperature warnings required to change the switch
status to MARGINAL and click Enter.
— Enter the number of fan speed warnings required to change the switch
status to DOWN and click Enter.
— Enter the number of fan speed warnings required to change the switch
status to MARGINAL and click Enter.
— Enter the number of port down warnings required to change the switch
status to DOWN and press the Enter.
— Enter the number of port down warnings required to change the switch
status to MARGINAL and click Enter.
— Enter the number of ISLstatus down warnings required to change the
switch status to DOWN and click Enter.
— Enter the number of ISLstatus down warnings required to change the
switch status to MARGINAL and click Enter.
Down Marginal
2
0
2
2
Fans 2
0
2
1
0
1
1
1
0
1
Fabric OS Procedures Version 3.1.x/4.1.x User Guide