Syslogd Cli Commands; Configuring Syslogd; Configuring Syslogd On The Remote Host - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Syslogd CLI Commands

Below is a list of commands that are related to the syslogd configuration. Please
refer to the help pages of these commands for more details.
syslogdipadd
syslogdipremove
syslogdipshow
errshow

Configuring syslogd

Configuring syslogd on the Remote Host

The syslogd configuration on the UNIX host provides the syslogd daemon with
instructions on how to process different messages it receives from the switch. The
following are example entries in the syslog configuration file, /etc/syslog.conf, on
how to store switch error log messages received from the Core Switch 2/64 or
SAN Switch 2/32 switch. Please refer to the syslog related manual pages on your
UNIX system for the full documentation of the syslog configuration file.
The following entry in /etc/syslog.conf causes all messages from the Core Switch
2/64 or SAN Switch 2/32 switch of UNIX priority warning or higher (Basically,
warning, error, critical, and panic messages) to be stored in the file
/var/adm/SilkWorm.
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
Command
Add the IP address of the remote syslogd host to the
switch.
Remove the IP address of the remote syslogd daemon from
the switch.
Show the list of configured syslogd IP addresses on the
switch.
Display messages from the error log on the switch.
Diagnostics and Status
Summary
173