Deleting A Wwn From The Access Control List - HP StorageWorks MSA 2/8 - SAN Switch User Manual

The SAN Management Application
MS Access List consists of (13): {
20:00:00:20:37:65:ce:aa
20:00:00:20:37:65:ce:bb
20:00:00:20:37:65:ce:ff
20:00:00:20:37:65:ce:11
20:00:00:20:37:65:ce:22
20:00:00:20:37:65:ce:33
10:00:00:60:69:04:11:24
10:00:00:60:69:04:11:23
21:00:00:e0:8b:04:70:3b
10:00:00:60:69:04:11:33
20:00:00:20:37:65:ce:55
20:00:00:20:37:65:ce:66
00:00:00:00:00:00:00:00
}
0 Done
1 Display the access list
2 Add member based on its Port/Node WWN
3 Delete member based on its Port/Node WWN
select : (0..3) [1] 0
done ...
Update the FLASH?
*Successfully saved the MS ACL to the flash.
switch:admin>

Deleting a WWN from the Access Control List

To delete a WWN from the ACL:
1. Log into the switch as the admin user.
2. Enter the msconfigure command at the command line. The command
130
(yes, y, no, n): [yes] y
becomes interactive.
Fabric OS Procedures Version 3.1.x/4.1.x User Guide