Disabling A Port - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Disabling a Port

To disable a port:
1. Log into the switch as the admin user.
2. At the command line, enter the portdisable command using the
Note:
The following example is the command output from the portdisable
command.
Example:
switch:admin> portdisable 4
The following examples show how to disable a port for SAN Switch 2/32 and a
Core Switch 2/64.
Example: SAN Switch 2/32
switch:admin> portdisable 4
switch:admin> portshow 4
portName:
portFlags: 0x300082d7
U_PORT SEG
MENTED CBL_LB LOGIN
portType: 4.1
portState: 1
portPhys: 6
portScn: 7
portRegs: 0x81050000
portData: 0x11efc2d0
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
following syntax:
portdisable [slotnumber]/portnumber
(Optional) Specify the slotnumber and portnumber that you want to
disable. If the port is connected to another switch, the fabric may reconfigure.
If the port is connected to one or more devices, these devices are no longer
available to the fabric.
The slot number is only required for the Core Switch 2/64 switch.
portLbMod: 0x10
Online
In_Sync
Segmented Flow control mode 0
Basic Switch Management
PRESENT ACTIVE E_PORT G_PORT
41