HP StorageWorks MSA 2/8 - SAN Switch User Manual page 163

There are two basic modes in which diagnostics can be manually run; they are
normal interactive mode and burnin mode. Burnin mode has additional control
commands for its operation.
Diagnostics are also executed in the power-on self test (POST) operation, but do
not require user command input. They are automatically activated when Field
Replaceable Units (FRUs) are brought online.
The following lists diagnostic test commands (refer to the HP StorageWorks
Fabric OS Version 3.1.x/4.1.x Reference Guide for more information):
The following test commands are run during POST:
Diagnostic control commands:
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
portregtest
sramretentiontest
spinfab
crossporttest
portloopbacktest
backport
cmemretentiontest
cmitest
statstest
portledtest
filtertest
turboramtest
centralmemorytest
cmitest
camtest
txdpath
spinsilk
backplanetest
diagenablepost
diagdisablepost
diagmodeshow
Diagnostics and Status
163