Setting C/T Id Attributes Panel - HP StorageWorks P9000 Reference Manual

Definition panel if the copy group is a CG container; and to the Copy Group Pair Detail panel if
the copy group is not a CG container. If you have already defined a copy pair during this process,
a confirmation dialog (Confirm Cancellation of Editing panel) is displayed for you to confirm
cancellation of the changes. For details about the Confirm Cancellation of Editing panel, see
"Confirm Cancellation of Editing Panel" (page
If you change a definition in the Copy Group Attributes panel and then press the F3=Exit key in
the Copy Group Detail Definition panel (or in the Copy Group Pair Detail panel), the Confirm
Configuration File Update panel is displayed. For details about the Confirm Configuration File
Update panel, see

Setting C/T ID Attributes Panel

If you clear Use Container and then press the Enter key in the Add Copy Group panel, or if you
press the F5=Add key in the Copy Group Detail Definition panel, the Setting C/T ID Attributes
panel is displayed. In this panel, you can define the consistency group ID of the copy group.
Figure 74 (page 86)
Figure 74 Setting C/T ID Attributes Panel
"Contents of the Setting C/T ID Attributes Panel" (page 86)
ID Attributes panel:
Table 58 Contents of the Setting C/T ID Attributes Panel
Item
C/T ID (JNLG)
sub C/T ID (JNLG).
If the copy type is BC, CA, or CAA, specifying a value in C/T ID (JNLG) and then pressing Enter
displays the Copy Group Pair Detail panel. If the copy type is CAJ, specifying a value in C/T ID
(JNLG) and sub C/T ID (JNLG) and then pressing Enter displays the Copy Group Pair Detail panel.
86 ISPF Panels
"Confirm Configuration File Update Panel" (page
shows the Setting C/T ID Attributes Panel.
Description
If the copy type is BC, CA, or CAA,
specify the C/T group ID (required for
CAA).
Specify a value between 00 and 7F
(depending on the storage system
type).
If the copy type is CAJ, specify the
journal group number of the primary
site as the C/T group ID (required for
CAJ).
Specify a value between 00 and FF.
Specify the journal group number of
the secondary site as the sub C/T
group ID (required for CAJ).
Specify a value between 00 and FF.
NOTE: For configurations that use
delta resync, specify the same value
for both the CAJ copy pair and the
CAJ copy pair for delta resync.
177).
describes the items in the Setting C/T
Specifiable copy types
BC
CA
CAA
CAJ
CAJ
180).