Zoning Setup Issues; Zoning Related Commands; Zone Specific Commands - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Troubleshooting
5. Chose the fabric on which to change the duplicate Domain ID; log into the
6. Enter the switchdisable command.
7. Enter the switchenable command.
8. Repeat steps 5 through 7 if additional switches have conflicting Domain IDs.

Zoning Setup Issues

The following sections cover various sources of zoning setup issues.

Zoning Related Commands

Table 14: Zoning Related Commands
switchshow
licenseshow
Table 15: Zone Specific Commands
cfgcreate
cfgshow
zoneadd
zoneshow
zonecreate
alicreate
alidelete
zonehelp
206
conflicting switch in that fabric.
This will enable the joining switch to obtain a new Domain ID as part of the
process of coming online. The fabric principal switch will allocate the next
available Domain ID to the new switch during this process.
Command
Displays currently enabled configuration and any E_port
segmentations due to zone conflicts.
Displays current license keys and associated (licensed)
products.
Command
Use to create a zone configuration.
Displays zoning configuration.
Use to add a member to an existing zone.
Displays zone information.
Use to create a zone. Before a zone becomes active, the
zonesave and cfgenable commands must be used.
Use to create a zone alias.
Use to delete a zone alias.
Displays help information for zone commands.
Function
Function
Fabric OS Procedures Version 3.1.x/4.1.x User Guide