HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 233

Chapter 8 Performance Manager
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Note
See the
Manager features.
Note
You see the dialog box shown in
Figure 8-3
Choose the VSAN from which to create flows. Flows are defined per active zone set.
Step 3
Step 4 Choose the Type radio button for the flow type you want to define.
Step 5 Optionally, check the Clear old flows on modified switches check box if you want to remove old flow
data.
Optionally, check the Create flows on all cards check box if you want to create flows on all cards for
Step 6
flexibility.
Click Next to review the available flows for the chosen VSAN.
Step 7
You see the dialog box shown in
OL-8007-10, Cisco MDS SAN-OS Release 3.x
If you are managing your fabrics with Performance Manager, you need to set up an initial set of
flows and collections on the fabric.
"Historical Performance Monitoring" section on page 60-4
When creating flows, make sure the device type is set correctly.
Figure
Define Traffic Flows Dialog Box
Figure
8-3.
8-4.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Flow Statistics Configuration
for a full description on Performance
8-5