HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 57

New and Changed Information
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 1 New and Changed Features for Release 3.x (continued)
Feature GUI Change
Configuring Rate Module dialog boxes
Mode
Oversubscription
Limits
Quick Config Wizard Quick Config Wizard on
the FC Menu of Device
Manager
Activating or Zone Log dialog box
Deactivating a Zone
Set
Assigning Device Global tab added to
Alias Modes Device Alias
configuration
FICON Tape TapeAccelerator option
Acceleration added to FCIP Tunnel
dialog box
Federal Information FIPS activation check
Processing Standards box
(FIPS) Publication
140-2
FCIP Wizard FCIP Wizard Select
Switch Pair dialog box
ESCON Style Port ESCON Style Port
Configuration check box added to the
Display Port Configuration
Table
FICON Configuration A confirmation dialog
Locking box displayed if the
FICON VSAN
information is changed.
SNMP over TCP/IP None - updated Server
Properties file
OL-8007-10, Cisco MDS SAN-OS Release 3.x
Description
Enables users to configure rate
mode oversubscription limits for a
single module or multiple modules.
Enables the user to add or remove
zone members per VSAN using
Device Manager.
The Quick Config Wizard is
Note
supported on the Cisco
MDS 9124 Switch only.
Users can use this dialog box to find
out whether the zone set activation
or deactivation was successful.
After setting their configuration to
enhanced mode, zoning and other
applications such as inter-VSAN
routing (IVR), Dynamic Port VSAN
Membership (DPVM), and port
security automatically keep track of
device alias changes.
Users can check this check box to
enable FICON tape acceleration
over the selected FCIP tunnel.
Users can enable FIPS mode per
switch.
Dialog box for selecting switches is
non-editable. Users must select a
switch from the drop-down menu.
Enables the user to see which ports
are available or prohibited in Device
Manager.
Enables the user to save any
changes to the FICON
configuration since the last refresh.
Enables SNMP messages to be
transported over TCP rather than
UDP for management traffic on the
out-of-band Ethernet management
port (mgmt0).
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Changed
in
Release Where Documented
3.1(1) Chapter 22, "Configuring
Generation 2 Switches
and Modules"
3.1(1) Chapter 30, "Configuring
and Managing Zones"
3.1(1) Chapter 30, "Configuring
and Managing Zones"
3.1(1) Chapter 31, "Distributing
Device Alias Services"
3.1(1) Chapter 36, "Configuring
FICON"
3.1(1) Chapter 38, "Configuring
FIPS"
3.1(1) Chapter 48, "Configuring
FCIP"
3.0(2) Chapter 36, "Configuring
FICON"
3.0(2) Chapter 36, "Configuring
FICON"
3.0(1) Chapter 3, "Fabric
Manager Server"
lvii