Defining 802.1X - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring Device Security
Defining 802. 1 X
STEP 3
STEP 4

Defining 802.1X

Cisco Small Business SFE/SGE Managed Switches Administration Guide
Interface Status field. In addition, the Limited Dynamic Lock mode is selected.
The possible range is 1-128. The default is 1.
•
Action on Violation — Indicates the action to be applied to packets arriving on a
locked port. The possible field values are:
-
Discard
— Discards packets from any unlearned source. This is the
default value.
-
Forward
— Forwards packets from an unknown source without learning
the MAC address.
-
Shutdown
— Discards packets from any unlearned source and shuts
down the port. The port remains shut down until reactivated, or until the
device is reset.
•
Enable Trap — Enables traps when a packet is received on a locked port. The
possible field values are:
-
Checked — Enables traps.
-
Unchecked
•
Trap Frequency — Displays the amount of time (in seconds) between traps.
The default value is 10 seconds.
Modify the relevant fields.
Click Apply. Port security is modified, and the device is updated.
802. 1 x Port Base Network Access Control allows access to a switch port by
authenticated and authorized device(s) attached to the port, and prevents access
to the port in cases the authentication and authorization fail. Port Authentication
includes:
•
Authenticators — A port that enforces authentication of the remote device
(supplicants) before permitting port access.
•
Supplicants — A remote device attaching to a port seeking port access.
— Disables traps.
4
80