Defining Qos Basic Mode - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring Quality of Service

Defining QoS Basic Mode

STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
Defining QoS Basic Mode
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Define the relevant fields.
Click Apply. The QoS Policy Binding is defined, and the device is updated.
Modifying QoS Policy Binding Settings
Click Quality of Service > Advanced Mode > Policy Binding. The
Page
opens:
Click the Edit button. The
Edit QoS Policy Binding Page
Edit QoS Policy Binding Page
The
•
Interface — Displays the interface to which the entry refers.
•
Policy Name — Displays the Policy name associated with the interface.
Define the relevant fields.
Click Apply. The QoS policy binding is defined, and the device is updated.
Basic Mode Page
The
Packets entering a QoS domain are classified at the edge of the QoS domain.
To define the Trust configuration:
Edit QoS Policy Binding Page
contains the following fields.
contains information for enabling Trust on the device.
11
Policy Binding
opens:
299