Defining Snmp Filter Settings - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring SNMP
Defining Trap Management
STEP 3
STEP 4
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Define the relevant fields.
Click Apply. The SNMP Notification Receivers are defined, and the device is
configured.

Defining SNMP Filter Settings

Filter Settings Page
The
to a device feature or a feature aspect. The Filter Settings Page also allows
network managers to filter notifications.
Click System > SNMP > Trap Management > Filter Settings. The
Page
opens:
Filter Settings Page
Filter Settings Page
The
•
Filter Name — Contains a list of user-defined notification filters.
•
Object ID Subtree — Displays the OID for which notifications are sent or
blocked. If a filter is attached to an OID, traps or informs are generated and sent
to the trap recipients.
•
Filter Type — Indicates whether informs or traps are sent regarding the OID to
the trap recipients.
permits filtering traps based on OIDs. Each OID is linked
contains the following fields:
12
Filter Settings
327