Defining Ip Routing - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring IP Information
IP Addressing
STEP 3
STEP 4
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Edit ARP Page
Edit ARP Page
The contains the following fields:
•
VLAN — Indicates the ARP-enabled interface.
•
IP Address — Indicates the station IP address, which is associated with the
MAC address filled in below.
•
MAC Address — Indicates the station MAC address, which is associated in the
ARP table with the IP address.
•
Status — Defines the ARP Table entry status. Possible field values are:
-
Dynamic
— Indicates the ARP entry is learned dynamically.
-
Static
— Indicates the ARP entry is a static entry.
Define the relevant fields.
Click Apply. The ARP Settings are modified, and the device is updated.

Defining IP Routing

If the switch has been defined as a router, network managers can define up to 32
static IP routes.
To define IP Routing:
7
221